Makita 18V Brushless 4-Stage Impact Driver

Description

Added features include the one-touch 4-speed power selector button  under the chuck, which enables one-handed speed changes, and  reverse rotation auto-stop mode which stops rotation and impact  when the fastener is loosened adequately to help prevent over loosening and dropped fasteners.

Features:

• Slim Tool Body with a re-designed head that is slimmer than the previous  model enabling the tool to have greater access to tight corners or confided spaces
• One Touch Bit Installation has been designed to prevent  the bit from unexpectedly falling off. A more effective mechanism has been  designed increasing the strength of the chuck with out increasing the resistance  required to install a bit
• Enhanced Anvil Holder; material change from needle bearing to ball bearing  provides reduction of bit wobbling. Providing more stability and control when  fastening
• Quick Change Selector; one touch mode selector located above the trigger  allows the user to jump between modes single handed. Quickly changing between  modes improves efficiency as you no longer have to take your hand off the tool
• Light Mode enables the tool to be used as a torch in dark environments. To turn  the light on set the F/R change lever to the neutral position and pull the switch  trigger. To turn off the light pull the trigger again
• 4 Optimised Application Modes; T-mode 1 and 2 for  self drilling screws in both thick and thin sheet metal. Wood mode for fastening  long wood screws. Bolt mode with rotation auto stop for tightening / loosening  bolts
• 4-Speed Power Selection allow the user to adjust the  power, speed and impact rate to suit the fastening application

Specifications:

• Voltage: 18V
• Drive shank: 6.35mm (1/4″) Hex
• Max tightening torque:
  • Max: 180Nm
  • Hard: 170Nm
  • Med: 50Nm
  • Soft: 20Nm
• No load speed:
• Max: 0 – 3600rpm
• Hard: 0 – 3200rpm
• Med: 0 – 2100rpm
• Soft: 0 – 1100rpm
• Impact rate:
• Max: 0 – 3800ipm
• Hard: 0 – 3600ipm
• Med: 0 – 2600ipm
• Soft: 0 – 1100ipm
• Max capacity:
• Standard bolt: M5 – M16
• High tensile bolt: M5 – M14
• Length: 114mm
• Weight: 0.9kg
• Charger and batteries not included